AEG LAVATHERM 59800 Kullanıcı Bilgileri - Sayfa 29

Kurutucu AEG LAVATHERM 59800 için çevrimiçi göz atın veya pdf Kullanıcı Bilgileri indirin. AEG LAVATHERM 59800 36 sayfaları. Aeg condenser dryer with heat pump
Ayrıca AEG LAVATHERM 59800 için: Kullanıcı Bilgileri (32 sayfalar)

Sayfayı Yazdır

Removing transport safety equipment

Caution! Before first starting up,

all parts of the transport safety

equipment must be removed.

1. Open loading door

2. Pull off adhesive strips from inside

machine on top of drum.

3. Remove foil hose and polystyrene

padding from the machine.

If the appliance was not transport-

ed in an upright position, leave it

to stand for 12 hours before con-

necting it to the electricity supply

and using it for the first time, so

that the oil can flow back to the

compressor. Otherwise the com-

pressor could be damaged.

Electrical connection

Details on mains voltage, type of current and the fuses required should

be taken from the type plate. The type plate is fitted near the loading

aperture (see "Machine description" section).

Important:

The plug must be accessible after the appliance has been installed.