AEG LAVATHERM 59840 사용자 설명서 - 페이지 20

{카테고리_이름} AEG LAVATHERM 59840에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM 59840 48 페이지. Condenser dryer with heat pump

Daily use

Drying cycle complete / removing laundry

Once the drying cycle is complete, display shows a blinking "0", under anti-

crease

signal sounds intermittently for about one minute.

The drying cycles (except for the WOOL programme) are automatically followed

by an anti-crease phase which lasts around 30 minutes. The drum rotates at in-

tervals during this phase. This keeps the laundry loose and free of creases. The

laundry can be removed at any time during the anti-crease phase. (The laundry

should be taken out towards the end of the anti-crease phase at the latest to

prevent creases from forming.) If LONG ANTI-CREASE

selected, the anti-crease phase is lengthened by 60 minutes.

1. Open door.

2. Before removing the laundry, remove fluff from the micro-fine filter. It is best

to use a damp hand for this purpose. (See "Care and cleaning" chapter.)

3. Remove laundry.

4. Turn the programme selector to OFF.

After each drying cycle:

- Clean the micro-fine filter and fine filter

- Drain the condensed water container

(See chapter "Care and cleaning".)

5. Close the door.

icon appear dash. If the BUZZER button has been pressed, an acoustic

function has been