AEG LAVATHERM 59840 Kullanıcı Kılavuzu - Sayfa 20

Kurutucu AEG LAVATHERM 59840 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG LAVATHERM 59840 48 sayfaları. Condenser dryer with heat pump

Sayfayı Yazdır

Daily use

Drying cycle complete / removing laundry

Once the drying cycle is complete, display shows a blinking "0", under anti-

crease

signal sounds intermittently for about one minute.

The drying cycles (except for the WOOL programme) are automatically followed

by an anti-crease phase which lasts around 30 minutes. The drum rotates at in-

tervals during this phase. This keeps the laundry loose and free of creases. The

laundry can be removed at any time during the anti-crease phase. (The laundry

should be taken out towards the end of the anti-crease phase at the latest to

prevent creases from forming.) If LONG ANTI-CREASE

selected, the anti-crease phase is lengthened by 60 minutes.

1. Open door.

2. Before removing the laundry, remove fluff from the micro-fine filter. It is best

to use a damp hand for this purpose. (See "Care and cleaning" chapter.)

3. Remove laundry.

4. Turn the programme selector to OFF.

After each drying cycle:

- Clean the micro-fine filter and fine filter

- Drain the condensed water container

(See chapter "Care and cleaning".)

5. Close the door.

icon appear dash. If the BUZZER button has been pressed, an acoustic

function has been