AEG LAVATHERM T7DBM730G 사용자 설명서 - 페이지 15
{카테고리_이름} AEG LAVATHERM T7DBM730G에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM T7DBM730G 24 페이지.
페이지 인쇄
1. Turn the appliance on.
2. Select 1 of the available programs.
3. Touch and hold down the
Dryness and
the same time.
One of the symbols appears on the
display:
- Maximum dryness
- Extra dryness
- Standard dryness
4. Touch the
repeatedly until you reach the
desired dryness level.
Dryness lev-
el
Maximum
dryness
Extra dry-
ness
Standard
dryness
5. To memorise the setting touch and
hold down the
10. CARE AND CLEANING
10.1 Cleaning the filter
At the end of each cycle the
symbol comes on the display and you
must clean the filter.
The filter collects the fluff
during the drying cycle.
1. Open the door. Pull the filter up.
Refresh buttons at
Start/Pause button
Display symbol
Dryness and
Filter
Refresh buttons at the same time for
approximately 2 seconds.
9.3 Deactivating the tank
indicator
The water container indicator is activated
by default. It illuminates at the end of the
drying cycle or during the cycle if the
water reservoir is full. If the draining kit is
installed the water container is drained
automatically and the indicator can be
deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Select 1 of the available programs.
3. Touch and hold down
and
Time Dry buttons at the
same time.
One of 2 configurations is possible:
• the Tank indicator:
symbol
water container indicator is
permanently activated
• the Tank indicator:
symbol
water container indicator is
permanently deactivated
2. Push the hook to open the filter.
3. Use a moist hand to clean both parts
of the filter.
ENGLISH
15
Refresh
is on if the
appears - the
is off if the
appears - the