AEG LAVATHERM T7DBM730G User Manual - Page 15

Browse online or download pdf User Manual for Dryer AEG LAVATHERM T7DBM730G. AEG LAVATHERM T7DBM730G 24 pages.

Print Page

1. Turn the appliance on.

2. Select 1 of the available programs.

3. Touch and hold down the

Dryness and

the same time.

One of the symbols appears on the

display:

- Maximum dryness

- Extra dryness

- Standard dryness

4. Touch the

repeatedly until you reach the

desired dryness level.

Dryness lev-

Maximum

dryness

Extra dry-

ness

Standard

dryness

5. To memorise the setting touch and

hold down the

10. CARE AND CLEANING

10.1 Cleaning the filter

At the end of each cycle the

symbol comes on the display and you

must clean the filter.

The filter collects the fluff

during the drying cycle.

1. Open the door. Pull the filter up.

Refresh buttons at

Start/Pause button

Display symbol

Dryness and

Filter

Refresh buttons at the same time for

approximately 2 seconds.

9.3 Deactivating the tank

indicator

The water container indicator is activated

by default. It illuminates at the end of the

drying cycle or during the cycle if the

water reservoir is full. If the draining kit is

installed the water container is drained

automatically and the indicator can be

deactivated.

To deactivate the indicator:

1. Turn the appliance on.

2. Select 1 of the available programs.

3. Touch and hold down

and

Time Dry buttons at the

same time.

One of 2 configurations is possible:

• the Tank indicator:

symbol

water container indicator is

permanently activated

• the Tank indicator:

symbol

water container indicator is

permanently deactivated

2. Push the hook to open the filter.

3. Use a moist hand to clean both parts

of the filter.

ENGLISH

Refresh

is on if the

appears - the

is off if the

appears - the