Kohler Stillness K-14455 설치 매뉴얼 - 페이지 2

{카테고리_이름} Kohler Stillness K-14455에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Stillness K-14455 20 페이지. Accessories
Kohler Stillness K-14455에 대해서도 마찬가지입니다: 설치 매뉴얼 (32 페이지), 주택 소유자 매뉴얼 (21 페이지)

페이지 인쇄

Thank You For Choosing Kohler Company

We appreciate your commitment to Kohler quality. Please take a few

minutes to review this manual before you start installation. If you

encounter any installation or performance problems, please don't

hesitate to contact us. Our phone numbers and website are listed on

the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Level

Phillips

Screwdrivers

Before You Begin

DANGER: Risk of personal injury. These products are not

designed or intended for use as a grab bar or support bar. Do

not install any of these products in any area where they are

likely to be used inadvertently as a grab bar or support bar.

These products should be located and mounted to a wall stud.

While it is possible to mount them to any surface, a stud

mounted product will yield the best results.

For proper installation, select a drill bit based on the type of

ﬁnished wall material. If the accessory will be attached to:

• ceramic tile, a 1/4" drill bit is required.

• drywall into a stud, a 1/8" drill bit is required.

• drywall between studs, a 5/16" drill bit is required.

Kohler Co. reserves the right to make revisions in the design of

products without notice, as speciﬁed in the Price Book.

1013267-2-E

Tape

Pencil

Measure

Plus:

Drill

• Assorted Drill Bits

Kohler Co.