Kohler Stillness K-14455 Installatiehandleiding - Pagina 2
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Kohler Stillness K-14455. Kohler Stillness K-14455 20 pagina's. Accessories
Ook voor Kohler Stillness K-14455: Installatiehandleiding (32 pagina's), Handleiding voor huiseigenaren (21 pagina's)
Pagina afdrukken
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Tools and Materials
Level
Phillips
Screwdrivers
Before You Begin
DANGER: Risk of personal injury. These products are not
designed or intended for use as a grab bar or support bar. Do
not install any of these products in any area where they are
likely to be used inadvertently as a grab bar or support bar.
These products should be located and mounted to a wall stud.
While it is possible to mount them to any surface, a stud
mounted product will yield the best results.
For proper installation, select a drill bit based on the type of
finished wall material. If the accessory will be attached to:
• ceramic tile, a 1/4" drill bit is required.
• drywall into a stud, a 1/8" drill bit is required.
• drywall between studs, a 5/16" drill bit is required.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
1013267-2-E
Tape
Pencil
Measure
Plus:
Drill
• Assorted Drill Bits
2
Kohler Co.