Kohler K-1109 설치 매뉴얼 - 페이지 9

{카테고리_이름} Kohler K-1109에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-1109 32 페이지. Bath whirlpool
Kohler K-1109에 대해서도 마찬가지입니다: 주택 소유자 매뉴얼 (36 페이지), 설치 매뉴얼 (36 페이지)

페이지 인쇄

8. Complete the Finished Wall

- If you have not already done so, carefully remove the protective tape from the whirlpool rim.

- If necessary allow for deck mounted valves and spout.

- Cover the framing with water-resistant wall material. Seal the joints between the whirlpool rim edge and the

water-resistant wall material with silicone sealant.

- Tape and mud the water-resistant wall material. Install the finished wall to the water-resistant wall material. Seal

the joints between the whirlpool rim and the finished wall material with silicone sealant.

- Install the faucet trim according to the instructions packed with the trim.

9. Clean-Up After Installation

- When cleaning up after installation, do not use abrasive cleansers, as they may scratch and dull the whirlpool

surface. Use warm water and a liquid detergent to clean the surface.

- Remove stubborn stains, paint, or tar with turpentine or paint thinner. Do not allow cleaners containing

petroleum distillates to remain in contact with any whirlpool surfaces for long periods of time. Remove plaster

by carefully scraping with a wood edge. Do not use metal scrapers, wire brushes, or other metal tools. Use a

powder-type detergent on a damp cloth to provide mild abrasive action to any residual plaster.

Kohler Co.

Finished Wall Material

Apply silicone sealant to the

edges of the water-resistant

wall material and the finished

wall

Water-Resistant

Wall Material

Framing

Whirlpool

1010997-2-