Kohler K-1109 설치 매뉴얼 - 페이지 9

{카테고리_이름} Kohler K-1109에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-1109 36 페이지. Bath whirlpool
Kohler K-1109에 대해서도 마찬가지입니다: 설치 매뉴얼 (32 페이지), 주택 소유자 매뉴얼 (36 페이지)

페이지 인쇄

8. Test Run the Whirlpool

Check all electrical connections, and make sure the electrical power to the whirlpool and heater (if

equipped) is on.

Make sure all union connections to the pump and heater are securely hand tightened.

Verify that the pump banding straps have been cut (if applicable), and that the pump is resting

directly on the subﬂoor or whirlpool base.

Fill the whirlpool to a level at least 2" (5.1 cm) above the top of the highest jet.

Operate the whirlpool for 5 minutes, and check all whirlpool piping connections for leaks.

For additional information on whirlpool operation, refer to "Conﬁrm Proper Operation".

Kohler Co.

1012295-2-D