Kohler K-11344 설치 매뉴얼 - 페이지 6

{카테고리_이름} Kohler K-11344에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-11344 25 페이지. Freestanding bath
Kohler K-11344에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (45 페이지), 설치 및 관리 매뉴얼 (28 페이지), 러프인 매뉴얼 (4 페이지)

페이지 인쇄

Apply

plumbers

putty.

Drain

Gasket

4. Secure the Drain to the Bath

CAUTION: Risk of property damage. Make sure a watertight seal exists on all bath drain connections.

CAUTION: Risk of product damage. Do not kink or cause damage to the cable on the bath drain

during installation.

Remove the drain from the bath shell.

Secure the Drain Elbow

Apply plumbers putty to the underside of the ﬂange.

Set the ﬂange on top of the drain outlet of the bath.

Apply silicone sealant to the underside of the drain gasket, then place the drain gasket on top of the

drain elbow.

Insert the nut through the center of the ﬂange and onto the threaded cylinder in the drain elbow.

Hand tighten the nut onto the threaded cylinder. Do not wrench tighten at this time.

Remove any excess putty around the ﬂange.

Secure the Overﬂow Elbow

Align the overﬂow elbow to the outside of the overﬂow outlet of the bath.

Insert the nut through the recessed side of the backplate.

Insert the nut with backplate onto the threaded cylinder of the overﬂow elbow.

Turn the nut clockwise until hand-tight to secure the nut with backplate to the threaded cylinder.

Do not wrench tighten at this time.

1055344-2-A

Nut

Flange

Drain

Outlet

Threaded

Cylinder

Drain Elbow

Overflow

Elbow

Threaded

Cylinder

Overflow

Outlet

Backplate

Nut

Kohler Co.