Kohler VINTAGE K-700 설치 매뉴얼 - 페이지 3

{카테고리_이름} Kohler VINTAGE K-700에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler VINTAGE K-700 21 페이지. Roughing-in guide
Kohler VINTAGE K-700에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (9 페이지), 러프인 매뉴얼 (4 페이지), 설치 및 관리 매뉴얼 (25 페이지), 매뉴얼 (4 페이지)

Kohler VINTAGE K-700 설치 매뉴얼
69" (175.3cm)
19" (48.3cm) R.

1. Prepare the Site

NOTICE: Make sure the floor will support 2000 lbs. (907kg). This is the combined weight of the bath,
water, and two bathers.
Make sure the flooring offers adequate support for your bath, and verify that the subfloor is flat and
level.
When constructing the framing, allow for the thickness of the finished wall materials.
CAUTION: Risk of product or property damage. Do not support the bath by the rim. Provide
adequate support under the feet.
For drop-in or raised-deck installations: Frame the floor, or construct 2x4 or 2x6 stud framing
according to the roughing-in information. Ensure that there is a 1/16" (2mm) gap between the
finished deck/floor surface so the bath does not rest on the rim. Use the template packed with the
bath to carefully lay out and cut the rough deck material.
Position the plumbing according to the roughing-in information. Cap the supplies and check for
leaks.
Make sure the drain location corresponds to the bath outlet.
For all installations: Position the plumbing according to the roughing-in information. Cap the
supplies and check for leaks.
For freestanding installations: Install the finished flooring and wall materials.
2. Prepare the Bath
CAUTION: Risk of personal injury. Cast iron baths are extremely heavy. Obtain sufficient help to
carefully lift or move the bath.
CAUTION: Risk of product or property damage. Do not support the bath by the rim. Provide
adequate support under the feet.
Install the drain to the bath according to the drain manufacturer's instructions. Do not connect the
trap at this time.
Position a clean drop cloth or similar material in the bottom of the bath. Be careful not to scratch the
surface of the bath.
Kohler Co.
40"
(101.6cm)
Cutout
Drop-In Installation
3
Metal Shims
1023725-2-A