Kohler C3 K-4107KR 설치 매뉴얼 - 페이지 7

{카테고리_이름} Kohler C3 K-4107KR에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler C3 K-4107KR 27 페이지. Toilet seat with bidet functionality

Kohler C3 K-4107KR 설치 매뉴얼
Inlet Hose
Supply Stop

6. Connect the Water Supply

IMPORTANT! Risk of product damage. Take care to face right in position to
the inlet pipe thread and seat thread. Take care not to crossthread or overtighten
connections. Hand tighten plus one-quarter turn is sufficient for tightening.
IMPORTANT! Risk of product damage. Use care not to scratch the product
surfaces.
Connect the T-valve directly to the toilet fill valve.
NOTE! For those newly installed plumbing pipes, (before the inlet hose is
connected to the T-valve,) must flush for several seconds to clean the inner
side of the pipe in order to remove the dirt and debris, etc.
Connect the T-valve to the toilet seat with the supplied hose.
NOTE:Please do not reuse the old hose.
Connect the water supply to the T-valve.
Turn on the water supply.
NOTE:Flush the water supply pipes thoroughly to remove debris. The
product is designed for tap water. Make sure not to use industrial water/grey
water/black water/sea water for the water supply.
Check all connections for leaks and make any adjustments as
needed.
Kohler Co.
T-Valve
Hose
7
1219877-KR01-B