Kohler C3 K-4107KR Посібник з монтажу - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з монтажу для Туалети Kohler C3 K-4107KR. Kohler C3 K-4107KR 27 сторінок. Toilet seat with bidet functionality

Друкувати сторінку

Inlet Hose

Supply Stop

6. Connect the Water Supply

IMPORTANT! Risk of product damage. Take care to face right in position to

the inlet pipe thread and seat thread. Take care not to crossthread or overtighten

connections. Hand tighten plus one-quarter turn is sufficient for tightening.

IMPORTANT! Risk of product damage. Use care not to scratch the product

surfaces.

Connect the T-valve directly to the toilet fill valve.

NOTE! For those newly installed plumbing pipes, (before the inlet hose is

connected to the T-valve,) must flush for several seconds to clean the inner

side of the pipe in order to remove the dirt and debris, etc.

Connect the T-valve to the toilet seat with the supplied hose.

NOTE：Please do not reuse the old hose.

Connect the water supply to the T-valve.

Turn on the water supply.

NOTE：Flush the water supply pipes thoroughly to remove debris. The

product is designed for tap water. Make sure not to use industrial water/grey

water/black water/sea water for the water supply.

Check all connections for leaks and make any adjustments as

needed.

Kohler Co.

T-Valve

Hose

1219877-KR01-B