Kohler CABERNET WATER-GUARD K-3408 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Kohler CABERNET WATER-GUARD K-3408에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler CABERNET WATER-GUARD K-3408 8 페이지. Vitreous china siphon vortex toilet

페이지 인쇄

For most satisfactory operation of this toilet, 25 to 80 p.s.i.

working pressure is required at the fixture. A full 1/2" sup-

ply shut-off valve is recommended. A plastic nut is pro-

vided with the toilet and must be used to make the supply

connection to the toilet.

Water Level Adjustment: Turn on the water supply to the

toilet, and adjust the water level in the tank to the line on

the flush valve overflow tube. Turn the adjustment screw

counterclockwise to raise the water level. To lower the

water level, turn the screw clockwise. Flush the toilet and

repeat until the water level in the tank matches the line on

the flush valve overflow tube.

Bowl Water Level Adjustment: Use the trip chain to lift

the flush ball in the tank slightly to allow water to trickle into

the bowl until the water level in the bowl stops rising. This

is the seal height and should be noted for subsequent

adjustment. Flush the toilet and observe the water level in

the bowl after refill. If the water level is below seal height,

turn the seal screw clockwise. Reflush the toilet and check

the water level. Continue adjustment until water stops

entering the bowl just as the seal height is reached.

112037-2-

(A)

Water

Level

Flush Ball

Trip Chain

Adjustment

Screw

Seal

Screw

Fig. #8

Kohler Co., Kohler, WI