Kohler HYDRO-TOWER 300 설치 지침 - 페이지 17

{카테고리_이름} Kohler HYDRO-TOWER 300에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler HYDRO-TOWER 300 27 페이지. Floor standing toilet
Kohler HYDRO-TOWER 300에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (18 페이지)

페이지 인쇄

2. Tighten the long screw into the holes of the tank bracket

and cover the drainage hole with the big cap, cover the

inlet hole with the small cap.

3. When finishing the brickwork of the wall, take out the big

and small caps, and eliminate unwanted mask with a sharp

knife.

Note:

When building the wall, the product cannot be cast

and filled by cement or be squeezed.

D. Installation of Toilet

1. Install the inlet pipe to the lavatory as shown, and mark on

the pipes at the back side of the tank with a ruler and a

pencil, and reserve appropriate space according to the

distance from the back of the tank to the inlet hole on the

wall.

2. Eliminate unwanted part of the inlet pipe according to the

marks of reserved space ,and rasp a smooth surface with

files.

1263048-T01-D

Inlet Hole

Drainage Hole

Big Cap

Inlet Pipe

Drainage Pipe

Reserved Space

Drainage Pipe

-9-

Small Cap

Long Screw

Tank Bracket

Mask

Small Cap

Inlet Pipe