Kohler K-10611T-RES 설치 지침 - 페이지 6

{카테고리_이름} Kohler K-10611T-RES에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-10611T-RES 27 페이지. Floor standing toilet

Install The Toilet

1. Install the waste outlet and water inlet as shown.

2. Put the bowl in position, and using a pencil, mark the

position of the bowl on the floor, as shown. Mark the

positions for the tank attachment bolts on the wall.

Caution!

Make sure that you avoid hidden cables and

pipes when drilling holes in the floor or wall.

3. Remove the bowl and place the installation template on

the floor. Drill the anchor bolt hole (depth

floor with an 15mm dia. drill, then remove the template.

It is suggested to reverse the bowl before drilling with the

template. Compare the actual loacation of installation hole

with the template to map more accurate installation

location, as shown in the following figure.

1332802-T01-E

S.trap

Fig.#2

Fig.#3

38mm) in the

Fig.#4

-6-

P.trap

UNIT mm