Kohler K-10611T-RES 설치 지침 - 페이지 7

{카테고리_이름} Kohler K-10611T-RES에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-10611T-RES 27 페이지. Floor standing toilet

4. Adjust the distance between centerline of PVC waste pipe

and the floor (wall) to match it consistent with marked

roughing-in.

Back

Installation

185

5. Move the toilet to the field and make sure the bottom

profile matches marked line on the ground.

6. Install the threaded rods through

the seat holes in the bowl. Tighten

bolts with hex wrench. Making sure

that they install correctly in the

holes in the floor.

It is suggested to use other auxillary

light such as torch to eluminate one

preserved installation hole of the

toilet. Watch the movement of the

threaded rod through the other

installation hole to better control the

installation process.

NOTE: Do not use white cement or

high lime content cements to install

this toilet. The expansion of cement

due to a rise in temperature may

make the toilet crack or cause

damage. Kohler is not responsible

for any damage caused by

installation with the use of cement.

1332802-T01-E

Back

Installation

Finished

Floor

155

Fig.#5

Fig.#6

-7-

PVC

UNIT mm

Finished

Floor