Kohler K301 설치 매뉴얼 - 페이지 7

{카테고리_이름} Kohler K301에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K301 40 페이지. 3/4 inch high-flow deck/rim mount bath valve
Kohler K301에 대해서도 마찬가지입니다: 소유자 매뉴얼 (17 페이지), 소유자 매뉴얼 (14 페이지), 소유자 매뉴얼 (17 페이지), 다국어 사용 설명서 (8 페이지)

페이지 인쇄

2-3/8" (6 cm) Copper

Tube (Finished Deck

or Bath Rim

Installation Only)

1/2"

Rubber

Tee

Washer

Fiber

Washer

2-7/8" (7.3 cm)

Copper Tubes

Mounting

Valve Body

Nut

3. Install the Valves

IMPORTANT! Do not solder the connections during this step.

Thread one mounting nut, ﬂange side up, followed by one ﬁber

washer and one rubber washers onto each valve body.

Insert the 2-7/8" (7.3 cm) long copper tubes between the valve

bodies and 1/2" tee.

For a ﬁnished deck or bath rim installation only, insert the 2-3/8"

(6 cm) long copper tube into the top of the tee.

NOTE: Orient the valve body marked "COLD" so it is on the right

when facing the front of the faucet.

Insert the valve bodies through the mounting holes from the

bottom of the deck/rim.

Hold the tube in place.

Place a collar, ﬂange side up, on each valve body and thread

them down to at least 1-13/16" (4.6 cm) from the top of the valve

stem.

Kohler Co.

Valve Stem

1-13/16"

(4.6 cm)

Collar

113969-2-AC