Kohler 14RESA 설치 및 작동 지침 매뉴얼 - 페이지 7

{카테고리_이름} Kohler 14RESA에 대한 설치 및 작동 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 14RESA 37 페이지. Residential/commercial generator sets
Kohler 14RESA에 대해서도 마찬가지입니다: 설치 지침 (4 페이지), 문제 해결 매뉴얼 (8 페이지), 설치 지침 (2 페이지), 운영 (20 페이지)

페이지 인쇄

1.3 Install the circuit breaker kit, if

required.

Note: The circuit breaker kit may be required if the APM

is not installed within sight of the generator sets.

Ensure that the installation complies with the

NEC and local codes.

If the circuit breaker kits are not used, proceed to

Section 1.4.

Doors Open

1. Decals, provided with APM

2. Circuit breakers GM75545 or GM77390, qty 2

3. Breaker bracket GM85151

4. Mounting screws X-67-133, qty. 4, and washers X-25-36,

qty. 8, provided with APM

Figure 9 Circuit Breaker Kit Installation Inside the APM Enclosure

TT-1596

8/22

11. Install circuit breaker mounting bracket GM85151

onto the back wall of the APM enclosure:

a. Remove the 4 existing screws X-67-133 and 8

existing washers X-25-36 from the back wall of

the enclosure. See Figure 9. Save the screws;

the washers can be discarded.

b. Align the bracket mounting holes with the holes

in the enclosure.

c. Secure the mounting bracket with the 4 screws

that were removed above.

5. Leads LN-0607-3131or LN-0407-3131, qty. 4

6. Decals, provided with APM

7. Remove knockouts for circuit breakers. See Figure 12.

Inner Door

GM85144