Kohler KDI 1903M 소유자 매뉴얼 - 페이지 25

{카테고리_이름} Kohler KDI 1903M에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler KDI 1903M 40 페이지. Diesel kdi
Kohler KDI 1903M에 대해서도 마찬가지입니다: 소유자 매뉴얼 (38 페이지), 소유자 매뉴얼 (50 페이지), 사용 및 유지 관리 (42 페이지)

페이지 인쇄

1. Engine Specifications

5.6 Check of the radiator heat-exchanger surface

NOTE:

Component not necessarily supplied by

KOHLER.

• Wear safety goggles when using compressed air.

• The radiator heat-exchange surface must be cleaned on

1. Check the radiator heat-exchange surface A.

2. Clean the surface with a brush soaked in special detergent

if it is clogged.

5.7 Rubber hoses check

The check is carried out by exerting a slight deflection or

bending along the pipe and near the hose clamps.

Components must be replaced if they have clear signs of

cracks, tears, cuts, leaks and do not retain a certain degree

of elasticity.

• If hoses are damaged contact an authorized KOHLER

1. Loosen the four capscrews E. Remove guard F.

2. Check that the:

- Fuel system hoses A are intact.

- Hoses for the cooling circuit B1 and B2.

To access the control of the cooling hoses B1 unscrew the

four screws E and remove the safe guard F.

- Vent system pipes C.

- Air system ducts D.

When the control is finished the safe guard F mount and

tighten the four screws E.

ED0053029510

_14.1

Index

INFORMATION ABOUT MAINTENANCE

For safety precautions see

•

Important

both sides.

Important

workshop.

Danger

Cap.

5.6

5.7