Kohler KDI 1903M Посібник користувача - Сторінка 25

Переглянути онлайн або завантажити pdf Посібник користувача для Портативний генератор Kohler KDI 1903M. Kohler KDI 1903M 40 сторінок. Diesel kdi
Також для Kohler KDI 1903M: Посібник користувача (38 сторінок), Посібник користувача (50 сторінок), Використання та обслуговування (42 сторінок)

5.6 Check of the radiator heat-exchanger surface

NOTE:

Component not necessarily supplied by

KOHLER.

• Wear safety goggles when using compressed air.

• The radiator heat-exchange surface must be cleaned on

1. Check the radiator heat-exchange surface A.

2. Clean the surface with a brush soaked in special detergent

if it is clogged.

The check is carried out by exerting a slight deflection or

bending along the pipe and near the hose clamps.

Components must be replaced if they have clear signs of

cracks, tears, cuts, leaks and do not retain a certain degree

of elasticity.

• If hoses are damaged contact an authorized KOHLER

1. Loosen the four capscrews E. Remove guard F.

2. Check that the:

- Fuel system hoses A are intact.

- Hoses for the cooling circuit B1 and B2.

To access the control of the cooling hoses B1 unscrew the

four screws E and remove the safe guard F.

- Vent system pipes C.

- Air system ducts D.

When the control is finished the safe guard F mount and

tighten the four screws E.

ED0053029510

_14.1

Index

INFORMATION ABOUT MAINTENANCE

For safety precautions see

•

Important

both sides.

Important

workshop.

Danger

Cap.

5.6

5.7