Kohler K-97631 설치 및 관리 매뉴얼 - 페이지 4

{카테고리_이름} Kohler K-97631에 대한 설치 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-97631 29 페이지. Locker
Kohler K-97631에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (29 페이지)

2. Measure and Trim the Locker

IMPORTANT! Use a circular saw and a ﬁne-toothed blade to trim the locker unit.

IMPORTANT! Do not cut the sides of the locker unit. Only trim the top or bottom to ﬁt your wall length.

IMPORTANT! Install the locker unit with the shelf grooves angled upward. The shelves will not stay in

place if you install the locker unit upside down.

Measure the vertical installation area and determine how much of the locker top and bottom you

need to trim.

Mark the cut-lines on the back side of the locker unit.

NOTE: Remove any protective ﬁlm from the locker unit surface before cutting.

Cut the locker unit along the marked lines.

IMPORTANT! It is critical that the locker unit is clean to create a strong adhesive bond.

Remove excess material and sand any rough edges using a sanding block.

Clean the back of the locker unit with denatured alcohol.

1248926-2-C

Wallboard

Backing

Kohler Co.