Kohler K-97631 Installatie- en onderhoudshandleiding - Pagina 4
Blader online of download pdf Installatie- en onderhoudshandleiding voor {categorie_naam} Kohler K-97631. Kohler K-97631 29 pagina's. Locker
Ook voor Kohler K-97631: Installatie- en onderhoudshandleiding (29 pagina's)
Pagina afdrukken
2. Measure and Trim the Locker
IMPORTANT! Use a circular saw and a fine-toothed blade to trim the locker unit.
IMPORTANT! Do not cut the sides of the locker unit. Only trim the top or bottom to fit your wall length.
IMPORTANT! Install the locker unit with the shelf grooves angled upward. The shelves will not stay in
place if you install the locker unit upside down.
Measure the vertical installation area and determine how much of the locker top and bottom you
need to trim.
Mark the cut-lines on the back side of the locker unit.
NOTE: Remove any protective film from the locker unit surface before cutting.
Cut the locker unit along the marked lines.
IMPORTANT! It is critical that the locker unit is clean to create a strong adhesive bond.
Remove excess material and sand any rough edges using a sanding block.
Clean the back of the locker unit with denatured alcohol.
1248926-2-C
Wallboard
Backing
4
Kohler Co.