Kohler Vanity K-2604 설치 및 관리 매뉴얼 - 페이지 2

{카테고리_이름} Kohler Vanity K-2604에 대한 설치 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Vanity K-2604 37 페이지. Vanity
Kohler Vanity K-2604에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (41 페이지)

페이지 인쇄

Tools

Important Information

CAUTION: Risk of property damage. Do not modify the

vanity. Doing so will compromise structural stability and may

cause property damage.

CAUTION: Risk of property damage. Use care when

moving the vanity to avoid impacting, sliding, or

side-loading the legs.

CAUTION: Risk of property damage. Select 250 lb (113.4

kg) load bearing 5/16" lag bolts with a length to clear

obstacles in the wall and 5/16" washers. Calculate proper lag

bolt length by adding the following: 1-1/2" (38 mm) backing

material + wallboard thickness + back rail thickness.

NOTICE: Siliconized acrylic caulk must be used to secure the sink

to the vanity. Do not use 100% silicone sealant which will damage

the ﬁnish of the vanity.

NOTICE: The ﬁnished wall must be straight and plumb to ensure

proper support of the vanity and alignment of the sink and door.

Observe all local plumbing and building codes.

Provide 2x6 backing material behind the ﬁnished wall to properly

support the vanity.

1207226-2-A

Plus:

• Wood Screws

• 2x6s

• 5/16" Lag Bolts and Washers

[Min 250 lb (113.4 kg) Load Bearing]

• Socket Wrenches

• Siliconized Acrylic Caulk

Kohler Co.