acaia Pearl 사용자 설명서 - 페이지 11

{카테고리_이름} acaia Pearl에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. acaia Pearl 16 페이지. Coffee scale
acaia Pearl에 대해서도 마찬가지입니다: 운영 매뉴얼 (20 페이지), 사용자 설명서 (2 페이지), 사용자 설명서 (18 페이지), 시작하기 (5 페이지), 빠른 시작 매뉴얼 (2 페이지), 시작하기 (12 페이지), 사용자 설명서 (18 페이지)

Default Weighing Unit Setting [ Unit ]

1. The Default Weighing Unit is set to grams if [ 9 ] is selected and ounce if [ o2 ] is selected.

2. Tap the tare button to switch the Default Weighing Unit between gram and ounce.

Weighing Resolution Setting [ rESoL ]

1. The default Weighing Resolution is set to [ dEFAUt ]; the division is 0.1 g for weights of 1000

g or less and 0.5 g for weights between 1000 g and 2000 g.

2. When the Weighing Resolution is set to high, the division will be 0.1 g throughout the entire

time from 0 g to 2000 g.

3. Tap the tare button to switch the weighing resolution between [ dEFAUL ] and [ hiGh ].

Espresso Mode Setting [ NoDE_1 ]

1. The default Espresso Mode Setting is set to OFF, which means this mode is disabled.

2. ON: The Espresso Mode is enabled.

3. OFF: The Espresso Mode is disabled.

Dual Display Mode Setting [ NodE_2 ]

1. By default, the Dual Display Mode Setting is set to ON, which means this mode is enabled.

2. ON: The Dual Display Mode is enabled.

3. OFF: The Dual Display Mode is disabled.

Timer Starts with Flow Mode Setting [ NodE_3 ]

1. By default, the Timer Starts with Flow Mode Setting is set to OFF, which means this mode is

disabled.

2. ON: The Timer Starts with Flow Mode is enabled.

3. OFF: The Timer Starts with Flow Mode is disabled.

Beverage Mode Setting [ NodE_4 ]

1. The default Beverage Mode is set to OFF, which means this mode is disabled.

2. ON: The Beverage Mode is enabled.

3. OFF: The Beverage Mode is disabled.

Auto-Tare Mode Setting [ NodE_5 ]

1. The default Auto-Tare Mode is set to ON, which means this mode is enabled.

2. ON: The Auto-Tare Mode is enabled.

3. OFF: The Auto-Tare Mode is disabled.

Reset to Default Setting [ rESEt.d ]

1. Select "YES" to reset all settings to default value.

Bluetooth Setup Setting [ bt_SEt ]

1. ON: The Bluetooth is enabled. The scale allows Bluetooth connection. Users may connect

the scale with Acaia apps.

2. OFF: The Bluetooth is disabled. The scale does not allow any Bluetooth connection.