acaia Pearl Kullanıcı Kılavuzu - Sayfa 11

Terazi acaia Pearl için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. acaia Pearl 16 sayfaları. Coffee scale
Ayrıca acaia Pearl için: Kullanım Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Başlayın (5 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Başlayın (12 sayfalar), Kullanıcı Kılavuzu (18 sayfalar)

acaia Pearl Kullanıcı Kılavuzu
Default Weighing Unit Setting [ Unit ]
1. The Default Weighing Unit is set to grams if [ 9 ] is selected and ounce if [ o2 ] is selected.
2. Tap the tare button to switch the Default Weighing Unit between gram and ounce.
Weighing Resolution Setting [ rESoL ]
1. The default Weighing Resolution is set to [ dEFAUt ]; the division is 0.1 g for weights of 1000
g or less and 0.5 g for weights between 1000 g and 2000 g.
2. When the Weighing Resolution is set to high, the division will be 0.1 g throughout the entire
time from 0 g to 2000 g.
3. Tap the tare button to switch the weighing resolution between [ dEFAUL ] and [ hiGh ].
Espresso Mode Setting [ NoDE_1 ]
1. The default Espresso Mode Setting is set to OFF, which means this mode is disabled.
2. ON: The Espresso Mode is enabled.
3. OFF: The Espresso Mode is disabled.
Dual Display Mode Setting [ NodE_2 ]
1. By default, the Dual Display Mode Setting is set to ON, which means this mode is enabled.
2. ON: The Dual Display Mode is enabled.
3. OFF: The Dual Display Mode is disabled.
Timer Starts with Flow Mode Setting [ NodE_3 ]
1. By default, the Timer Starts with Flow Mode Setting is set to OFF, which means this mode is
disabled.
2. ON: The Timer Starts with Flow Mode is enabled.
3. OFF: The Timer Starts with Flow Mode is disabled.
Beverage Mode Setting [ NodE_4 ]
1. The default Beverage Mode is set to OFF, which means this mode is disabled.
2. ON: The Beverage Mode is enabled.
3. OFF: The Beverage Mode is disabled.
Auto-Tare Mode Setting [ NodE_5 ]
1. The default Auto-Tare Mode is set to ON, which means this mode is enabled.
2. ON: The Auto-Tare Mode is enabled.
3. OFF: The Auto-Tare Mode is disabled.
Reset to Default Setting [ rESEt.d ]
1. Select "YES" to reset all settings to default value.
Bluetooth Setup Setting [ bt_SEt ]
1. ON: The Bluetooth is enabled. The scale allows Bluetooth connection. Users may connect
the scale with Acaia apps.
2. OFF: The Bluetooth is disabled. The scale does not allow any Bluetooth connection.
11