acaia Orion Nano 시작하기 - 페이지 6

{카테고리_이름} acaia Orion Nano에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. acaia Orion Nano 10 페이지.

DIAL INTERFACE / ADJUST WEIGHT

[Rotate] the dial to toggle between different preset

weights. [Press] Power and the preset starts

flashing. Turn the Dial to adjust the preset weight

and [press] Power again to save your setting.

TOGGLE MODES

Switch between modes [Press and hold] Power to

see the current mode. [Rotate] the Dial to switch

between Manual and Auto modes. [Press] Power

again to save your setting.

AUTO DOSING MODE

[Press and hold] Power for 3 seconds to enter mode

settings. Turn the Dial to select "Auto" and [press] Power

to save your setting. [Press] Dose to enter Ready mode.

You can then begin auto-tare and auto-dosing. Turn the

Dial to select "Auto" and [press] Power to save your

setting.

WEIGHING ONLY MODE

In weighing mode, the Orion Nano functions as a scale

with a 500 g capacity. Place the object on the platform

and the weight will show on the display. The Power

and Dose buttons will function as 'Zero' and 'Tare'.