AAXA Technologies M1 Ultimate X 사용자 설명서 - 페이지 15

{카테고리_이름} AAXA Technologies M1 Ultimate X에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AAXA Technologies M1 Ultimate X 17 페이지. Micro projector
AAXA Technologies M1 Ultimate X에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄

TROUBLESHOOTING

THE PROJECTOR DOES NOT TURN ON

Possible Causes

There is no power

The projector is in the shut-down cooling cycle

NO PICTURE

Possible Causes

The video source is not properly connected

The correct input source has not been selected

IMAGE IS BLURRED

Possible Causes

The Projector is not in focus

The Projector is offset from plane / angle of

operation

SD CARD IS NOT RECOGNIZED

Possible Causes

SD Card is not inserted properly

SD Card is damaged

REMOTE CONTROL DOES NOT WORK

Possible Causes

The remote control battery is dead

The Projector is not receiving the infrared

signal

Solution

Check to ensure the power outlet or battery

source is good. Check the power adapter to

ensure a proper connection with the wall outlet

as well as the Projector.

Wait until the Projector has fully cooled to

restart

Solution

Check the video source signal to ensure that it

is properly connected

Select the correct input source by pressing the

Source key on the remote.

Solution

Adjust the focus with the focus adjustment dial

until the image comes into focus

Move the projector so that it is at both 180

degrees and on an even plane with the screen.

Please see Page 9

Solution

Re-insert SD Card

Replace SD Card

Solution

Replace the battery with comparable CR2025

battery

Ensure there are no obstacles blocking the

infrared signal to the Projector