AAXA Technologies M1 Ultimate X Podręcznik użytkownika - Strona 15
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Projektor AAXA Technologies M1 Ultimate X. AAXA Technologies M1 Ultimate X 17 stron. Micro projector
Również dla AAXA Technologies M1 Ultimate X: Specyfikacje (2 strony)
Drukuj stronę
TROUBLESHOOTING
THE PROJECTOR DOES NOT TURN ON
Possible Causes
There is no power
The projector is in the shut-down cooling cycle
NO PICTURE
Possible Causes
The video source is not properly connected
The correct input source has not been selected
IMAGE IS BLURRED
Possible Causes
The Projector is not in focus
The Projector is offset from plane / angle of
operation
SD CARD IS NOT RECOGNIZED
Possible Causes
SD Card is not inserted properly
SD Card is damaged
REMOTE CONTROL DOES NOT WORK
Possible Causes
The remote control battery is dead
The Projector is not receiving the infrared
signal
Solution
Check to ensure the power outlet or battery
source is good. Check the power adapter to
ensure a proper connection with the wall outlet
as well as the Projector.
Wait until the Projector has fully cooled to
restart
Solution
Check the video source signal to ensure that it
is properly connected
Select the correct input source by pressing the
Source key on the remote.
Solution
Adjust the focus with the focus adjustment dial
until the image comes into focus
Move the projector so that it is at both 180
degrees and on an even plane with the screen.
Please see Page 9
Solution
Re-insert SD Card
Replace SD Card
Solution
Replace the battery with comparable CR2025
battery
Ensure there are no obstacles blocking the
infrared signal to the Projector