Aqua Creek F-004PPPB-AT1 설치 및 운영 지침 매뉴얼 - 페이지 4
{카테고리_이름} Aqua Creek F-004PPPB-AT1에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Creek F-004PPPB-AT1 20 페이지.
PORTABLE LIFT - ASSEMBLY INSTRUCTIONS
1. Begin by placing the parts from the previous page at or near to the desired
poolside location.
2. Stack 14 supplied round weight plates on the portable platform. To ensure proper
alignment stack 3 to 4 plates, check alignment by temporarily putting the cover
on, remove the cover and then stack 3 to 4 more plates. Repeat until all 14 weight
plates are on the platform and properly aligned.
3. Attach the weight stack cover assembly over the weight stack using the supplied
¼" NYLOCK NUTS and ¼" FLAT WASHERS. NOTE: Be sure to use silicone
to seal the flange before bolting together.
NOTE: Step 4 is applicable only for the Portable Kit (sold w/o lift).
4. Bolt the Pro Pool-AT Lift to the portable base plate using the supplied 1/2"x1-
1/2" countersunk flat head bolts, 1/2" flat washers and 1/2" nylon lock nuts.
4