Aqua Creek F-004PPPB-AT1 Handleiding voor installatie en gebruik - Pagina 4

Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Aqua Creek F-004PPPB-AT1. Aqua Creek F-004PPPB-AT1 20 pagina's.

Pagina afdrukken

PORTABLE LIFT - ASSEMBLY INSTRUCTIONS

1. Begin by placing the parts from the previous page at or near to the desired

poolside location.

2. Stack 14 supplied round weight plates on the portable platform. To ensure proper

alignment stack 3 to 4 plates, check alignment by temporarily putting the cover

on, remove the cover and then stack 3 to 4 more plates. Repeat until all 14 weight

plates are on the platform and properly aligned.

3. Attach the weight stack cover assembly over the weight stack using the supplied

¼" NYLOCK NUTS and ¼" FLAT WASHERS. NOTE: Be sure to use silicone

to seal the flange before bolting together.

NOTE: Step 4 is applicable only for the Portable Kit (sold w/o lift).

4. Bolt the Pro Pool-AT Lift to the portable base plate using the supplied 1/2"x1-

1/2" countersunk flat head bolts, 1/2" flat washers and 1/2" nylon lock nuts.