Aqua Creek Products Power EZ 2 매뉴얼 - 페이지 4

{카테고리_이름} Aqua Creek Products Power EZ 2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Creek Products Power EZ 2 11 페이지. Pool lift and hard seat option
Aqua Creek Products Power EZ 2에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지), 매뉴얼 (11 페이지), 매뉴얼 (12 페이지)

페이지 인쇄

STEP 5. Locate the chain assembly and insert each "S" hook

into the holes in the sling support bars (A).

Attach the hanger to the boom eye on the lift (B).

Adjust the chain links so that the sling is at the

appropriate height to allow the user easy access (C).

This may require several adjustments. Also, be

mindful of any obstacles such as coping or a gutter

that will need to be cleared.

STEP 6. Attach the handset controller plug at the base of

the control box. Press fi rmly until plug is fully seated in the

control box.

STEP 7. Slide the EZ turn bar into the attachment bracket.

Mount the FULLY CHARGED 24V battery on top of the control

box. When properly mounted the battery will lock in place,

causing a 'click' sound, and will sit fl ush and square with the

control box.

ATTENTION! THE BATTERY MUST BE CHARGED FOR 24

HOURS BEFORE FIRST USE. STORE THE BATTERY ON THE

CHARGER AND NEVER LEAVE THE BATTERY ON THE LIFT

WHEN NOT IN USE.

Assembly is complete. Prior to lifting any persons, it is

recommended that the lift be operated once without a load

to check for proper functioning (and that the instructions for

operating the lift be read and incorporated into a training

program for the persons who will be operating the lift). For

any person operating the lift, please continue to operating

instructions. Read carefully for comprehension.

Assembly Instructions

STEP 5

STEP 6

STEP 7

24V BATTERY

(CHARGED)

EZ TURN

BAR

Revised 4/3/17