Aqua Creek Products SPA LIFT ULTRA 매뉴얼 - 페이지 5
{카테고리_이름} Aqua Creek Products SPA LIFT ULTRA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Creek Products SPA LIFT ULTRA 11 페이지.
Aqua Creek Products SPA LIFT ULTRA에 대해서도 마찬가지입니다: 지침 매뉴얼 (12 페이지), 매뉴얼 (12 페이지)
Spa Lift Ultra Installation and Assembly
5. Connect the control arm to the mast using the 1/2 inch shoulder bolt and 3/8 inch nylock and flat washer, as
shown in FIGURE 6. Careful not to scratch the control arm on the lifting arm while attaching.
6. Connect the chair arm assembly to the lifting and control arms using the 1/2 inch shoulder bolts and 3/8 inch
nylocks and flat washers. This may require two people. See FIGURE 7.
LIFTING ARM
3/8" NYLOCK
3/8" FLAT WASHER
ACTUATOR
FIGURE 6
7. Attach the safety belt to the chair, as shown in FIGURE 8.
8. The Spa Lift Ultra is now assembled and ready for use! Be sure the battery is fully charged. FIGURE 9 shows
completed assembly mounted on a spa deck.
LOOP ON TOP
FOR EASY ACCESS
FIGURE 8
Copyright © 2016 Aqua Creek Products All Rights Reserved
CONTROL ARM
1/2" X 2 3/4"
SHOULDER BOLT
MAST ASSEMBLY
THREAD THROUGH
SLOTS AND PINCH
TOGETHER TO HOLD
3/8" FLAT WASHER (2)
3/8" NYLOCK (2)
CHAIR ARM
ASSEMBLY
FIGURE 7
FIGURE 9
1/2" X 3" SHOULDER
BOLT (2)
5
Revised 1/29/16