Aqua Creek Products SPA LIFT ULTRA 매뉴얼 - 페이지 6

{카테고리_이름} Aqua Creek Products SPA LIFT ULTRA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Creek Products SPA LIFT ULTRA 11 페이지.
Aqua Creek Products SPA LIFT ULTRA에 대해서도 마찬가지입니다: 지침 매뉴얼 (12 페이지), 매뉴얼 (12 페이지)

페이지 인쇄

Problem:

The lift won't move.

Solution:

1) Make sure the battery is properly seated:

You should hear a click when the

battery is properly seated on the

control box or charger.

2) Make sure the cords are properly plugged in:

NOT Properly Inserted:

The cord plug is fl ush with

or sticking out of the outlet

3) Check the contact points:

Problem:

The lift stopped moving over the water and is stuck.

Solution:

1) Press the Emergency button:

Use a pen or pencil tip and stick it into

the emergency button on the front of

the control box to retract the lift.

Note: the lift will not retract if the battery

is not adaqately charged or if the control

box is not working. The emergency

button only overrides the remote

handset.

Basic Troubleshooting

POP!

Properly Inserted:

The cord plug is recessed

into the outlet

Make sure the contact points

on the control box and the

battery are not damaged or

corroded. If there is corrosion

clean with Scotch-Brite

pad. Apply dielectric grease

on the contact points before

reattaching the battery.

Click!

NOT Properly Attached:

Note: the white bracket is

in front of the silver clip,

which will not allow for an

electrical connection

Check the ends of the cords for corrosion or

damage. The cord plugs should be recessed into

the outlet. You should feel them pop into place

when they are correctly inserted.

4) Make sure the battery is fully charged:

Properly Attached:

Note: the white bracket

is behind the silver clip,

holding it securely to allow

for an electrical connection

The Charger is

ON when the

green light is

glowing

The Battery is

CHARGING when

the orange light is

glowing

When the Battery

is fully charged

the orange light

will stop glowing

Revised 1/29/16