Aqua Creek Products F-409CBK 매뉴얼 - 페이지 4

{카테고리_이름} Aqua Creek Products F-409CBK에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Creek Products F-409CBK 7 페이지. Electronic conversion kit

TOOLS REQUIRED:

FLAT BLADE SCREWDRIVER

Connect the two (2) hose clamps to the actuator shaft. To

do this, use a ﬂ at blade screwdriver to open the hose clamps.

Put the opened hose clamp around the actuator shaft and

close the clamp. Secure the clamp using the ﬂ at blade

screwdriver but leave loose. See ﬁ gure to the right.

CONNECT TABS

TO HOSE CLAMPS

Two Piece Control Box Installation

With the Linak two

piece control box

installed, slide the

bracket over and down

onto the two hose

clamps. Be sure to use

the top and bottom

tabs of the bracket, not

the middle tab.

See ﬁ gure to the left.

Using the ﬂ at blade

screwdriver, tighten

the bolts on the hose

clamps to secure control

box in place.

See ﬁ gure to the right.

HOSE CLAMP (2)

TIGHTEN BOLT

Revised 8/22/19