Aqua Creek Products F-409CBK Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} Aqua Creek Products F-409CBK. Aqua Creek Products F-409CBK 7 pagina's. Electronic conversion kit

Pagina afdrukken

TOOLS REQUIRED:

FLAT BLADE SCREWDRIVER

Connect the two (2) hose clamps to the actuator shaft. To

do this, use a ﬂ at blade screwdriver to open the hose clamps.

Put the opened hose clamp around the actuator shaft and

close the clamp. Secure the clamp using the ﬂ at blade

screwdriver but leave loose. See ﬁ gure to the right.

CONNECT TABS

TO HOSE CLAMPS

Two Piece Control Box Installation

With the Linak two

piece control box

installed, slide the

bracket over and down

onto the two hose

clamps. Be sure to use

the top and bottom

tabs of the bracket, not

the middle tab.

See ﬁ gure to the left.

Using the ﬂ at blade

screwdriver, tighten

the bolts on the hose

clamps to secure control

box in place.

See ﬁ gure to the right.

HOSE CLAMP (2)

TIGHTEN BOLT

Revised 8/22/19