Aqua Creek Products AT053426 운영자 매뉴얼 - 페이지 5

{카테고리_이름} Aqua Creek Products AT053426에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Creek Products AT053426 8 페이지.

NOTE: The main wire cable should be replaced every year

with light usage such as by a single user at home, and

every six months if the machine is in a multi user setting

where it is likely to undergo heavy usage.

The ProTone main wire cable needs to be strung correctly

in order for the machine to function properly. Begin by

hooking the top of the wire onto the hook at the top of the

Deltoid-Latslider Assembly. Now, run the cable along the

pulley's as shown in FIG. 1 to the right, FIG. 2 below, and FIG.

3 on the following page. Once the cable is run through all

the pulley's and the end is connected to the hook on the

curl arm, repeat the process on the opposite side of the

ProTone.

TIP:

There is also a full video on how to string the main wire

cable on our website, www.aquacreekproducts.com.

MAIN WIRE CABLE

ProTone Main Wire Assembly

FIGURE 2

MAIN WIRE

CABLE

WIRE WILL

BE BEHIND

PLATE

FIGURE 1

Revised 12/14/20