Fencee MX10 사용자 설명서 - 페이지 9

{카테고리_이름} Fencee MX10에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fencee MX10 16 페이지. Remote monitoring of fence parameters
Fencee MX10에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

Fencee MX10 사용자 설명서

9. INSTALLING THE MONITOR ON A FENCE

After pairing the Monitor with the Gateway, it is possible to place the Monitor in the desired
location of measurement on the fence system.
Before installation, it is necessary to turn off the energizer, in order to ensure safe handling.
We install the Monitor as shown in Figure 4.
After installation, it is possible to turn on the energizer and turn on the Monitor.
Placement rules:
The Monitor can be installed outdoors in an fence system, it is resistant to normal weather
conditions.
The Monitor can be easily installed with cable ties.
Never place the Monitor on the ground - in a humid or wet environment.
Never expose the Monitor to a continuous stream of water.
For a better signal and connection within 30 km
TIP:
it is possible to use an external antenna.
Figure 4: Connecting the Monitor to the fence system
9