Deye INGE 사용자 설명서 - 페이지 3

{카테고리_이름} Deye INGE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Deye INGE 20 페이지. Hybrid inverter

페이지 인쇄

1. Safety Introductions

・This chapter contains important safety and operating instructions. Read and keep this

manual for future reference.

・Before using the inverter, please read the instructions and warning signs of the battery

and corresponding sections in the instruction manual.

・Do not disassemble the inverter. If you need maintenance or repair, take it to a

professional service center.

・Improper reassembly may result in electric shock or fire.

・To reduce risk of electric shock, disconnect all wires before attempting any

maintenance or cleaning. Turning off the unit will not reduce this risk.

・Caution: Only qualified personnel can install this device with battery.

・Never charge a frozen battery.

・For optimum operation of this inverter, please follow required specification to select

appropriate cable size.It is very important to correctly operate this inverter.

・Be very cautious when working with metal tools on or around batteries. Dropping a

tool may cause a spark or short circuit in batteries or other electrical parts,even cause

an explosion.

・Please strictly follow installation procedure when you want to disconnect AC or DC

terminals. Please refer to "Installation" section of this manual for the details.

・Grounding instructions - this inverter should be connected to a permanent grounded

wiring system. Be sure to comply with local requirements and regulation to install this

inverter.

・Never cause AC output and DC input short circuited. Do not connect to the mains

when DC input short circuits.

2. Product Introduction

This is a multifunctional inverter,combining functions of inverter, solar charger and

battery charger to offer uninterruptible power support with portable size. Its

comprehensive LCD display offers user configurable and easy accessible button operation

such as battery charging ,AC/solar charging, and acceptable input voltage based on

different applications.

- 01 -

2.1 Product Overview

1: Inverter Indicators

7: CAN Port

2: LCD display

8: Battery input connectors

3: Function Buttons

9: Function Port

4: DC Switch

10: Parallel Box(master)

5: Power on/off button

11: Parallel port

6: RS 485 Port

12: PV input with two MPPT

13: Grid

14: Generator input

15: Load

16: WiFi Interface

- 02 -