AB Quality MobileView Guard G750 빠른 시작 매뉴얼 - 페이지 16

{카테고리_이름} AB Quality MobileView Guard G750에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AB Quality MobileView Guard G750 20 페이지.

MobileView Guard G750

Power Supply Requirements

Electrical Specifications

24V dc Power Supply

Grounding

ATTENTION

Publication 2727-QS002E-MU-P

Use a 24V dc Safety Extra Low Voltage power supply.

Supply Voltage Range: 18V dc to 32V dc

Current Consumption: 300mA at 24V dc

Peak Inrush Current: 5.6 A maximum

Connect Earth Ground to the Junction Box using the Earth

Ground Screw (shown on page 14).

• The device meets the safety class III in accordance with EN

61131-2 and EN 50178. The 24V power supply for the

equipment must provide appropriate isolation between the

safety-extra-low-voltage circuits and dangerous-contact

voltage circuits (for example, by safety transformers or

similar facilities).

• The power supply circuit must be protected with a 3.15 A

fuse.

• The nominal supply voltage directly of the MobileView

terminal (without the MobileView Connection Cable) is

+24V dc (supply voltage range: 18 to 32V dc).

Typical current consumption is:

- 300 mA at 24V dc

-400 mA at 18V dc

When planning the power supply, take into account the

voltage drop on the Connection Cable.

Specification of power supply lines in this cable:

Cross section: AWG24 (0.24 mm

Material: zinc-coated copper strand

Line resistance:

)

90 Ohm/km (

145 Ohm/mile)