Aqua Lung 63093 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Aqua Lung 63093에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Lung 63093 8 페이지. Slt neck & wrist seal

DETACHING THE NECK SEAL

1. Press the Neck Tite Tool towards the bottom of the groove in the Neck Ring. (See

also cross section in image 2 of this section).

2. Press the tool in the direction of the arrow and force the groove in the Neck Ring to

"open up" and start releasing the Lock Ring.

3. When the tool has reached the bottom of the groove, it's time to use the tool to bend

up the Lock Ring from the groove.

4. Press up the Lock Ring from the groove.

5. When you have successfully released the Lock Ring you can use your fingers to pull

the seal and Lock Ring out of its position. If the same seal will be used again,

please be careful and check for damages on the seal.

Always make a leakage and stress test on your drysuit seals before diving.

ENGLISH