Aqua Lung 63093 소유자 매뉴얼 - 페이지 5

{카테고리_이름} Aqua Lung 63093에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Lung 63093 8 페이지. Slt neck & wrist seal

1. Assemble the wrist seal by inserting it through the Oval Stiff Ring and bringing it

back 1.5cm over the ring.

2. Different drysuits, drysuit designs and fabrics demand a different approach when

mounting the seal. Refer to images 3-4. NOTE: A silicone seal has a shiny surface

on one side and a matte finish on the other. Keep in mind that it is the matte surface

that seals against your skin. IMPORTANT: These two images illustrate two different

ways of positioning the seal depending on the design and fabric of the drysuit and how

the PU-Ring is attached into the drysuit. When you have reached the final step in the

mounting process, one of these mounting alternatives will work better than the other. It

is important to try assembling the components both ways to see which one works best.

3. Adjust the seal so that it covers the area marked in red and aligns towards the part

of the Oval Stiff Ring marked in yellow.

4. The alternative way to do this is to adjust the seal so that it covers the area marked

in yellow. Preferred alternative depends on the design of the suit.

*Color markings are only

for illustrative use and are

not found on the product.

Profile of Oval Ring

MOUNTING THE WRIST SEAL

Position of Seal

ENGLISH