Aqua Lung 63093 Manual do Proprietário - Página 5

Procurar online ou descarregar pdf Manual do Proprietário para Instrumento de mergulho Aqua Lung 63093. Aqua Lung 63093 8 páginas. Slt neck & wrist seal

Imprimir página

1. Assemble the wrist seal by inserting it through the Oval Stiff Ring and bringing it

back 1.5cm over the ring.

2. Different drysuits, drysuit designs and fabrics demand a different approach when

mounting the seal. Refer to images 3-4. NOTE: A silicone seal has a shiny surface

on one side and a matte finish on the other. Keep in mind that it is the matte surface

that seals against your skin. IMPORTANT: These two images illustrate two different

ways of positioning the seal depending on the design and fabric of the drysuit and how

the PU-Ring is attached into the drysuit. When you have reached the final step in the

mounting process, one of these mounting alternatives will work better than the other. It

is important to try assembling the components both ways to see which one works best.

3. Adjust the seal so that it covers the area marked in red and aligns towards the part

of the Oval Stiff Ring marked in yellow.

4. The alternative way to do this is to adjust the seal so that it covers the area marked

in yellow. Preferred alternative depends on the design of the suit.

*Color markings are only

for illustrative use and are

not found on the product.

Profile of Oval Ring

MOUNTING THE WRIST SEAL

Position of Seal

ENGLISH