DFE STEADYWEB 6 빠른 시작 매뉴얼 - 페이지 7

{카테고리_이름} DFE STEADYWEB 6에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DFE STEADYWEB 6 12 페이지. Tension controller
DFE STEADYWEB 6에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

페이지 인쇄

With no other loads on the transducer roll, ZERO the transducers,

hang a calibration weight of known value with an inelastic rope,

strap or cable, and CALIBRATE the transducer signal, exactly as

instructed in SECTION 6 - CALIBRATION of The Manual. The

calibration weight should weigh at least 10% of your maximum

expected web tension.

When the transducer signal is calibrated, press the Display button

to return to the tension display.

If additional calibration is required for inputs of Line Speed, Roll

Speed or Roll Diameter, refer to SECTION 6 - CALIBRATION of

the The Manual.

Program settings are based on the tension zone in which the

controller is being used. For setting up Unwind, Intermediate and

Rewind Zones, refer to SECTION 7 - SETUP of The Manual.