Allied Data Technologies Tornado PCI V.90 설치 매뉴얼 - 페이지 6
{카테고리_이름} Allied Data Technologies Tornado PCI V.90에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Data Technologies Tornado PCI V.90 12 페이지. Fax/modem
페이지 인쇄Tornado PCI V.90
1. First of all you have to check what kind of modem you have. This could be a modem type
"controllerless" or "softmodem" . On the backside of the modem should be a white label.
This label contains the product code.
If the modem has got a
product code with a C
it is a controllerless type.
You will find the drivers
in the VFM56.0-PRC map
at the CD or on our
Website.
If the modem has got a
product code with a S
it is a softmodem type.
You will find the drivers
in the VFM56.0-PRS map
at the CD or on our
Website.
2. Turn off your computer and disconnect the power from the electricity network.
The power may not be on while you are installing the internal fax/modem, as you might
damage your computer.
3. Loosen the necessary screws to remove the cover of the system casing.
Place the screws in a safe place and remove the cover.
4. Select one of the available PCI slots into which you would like to insert your internal
fax/modem.
5. Loosen the cover on top of the slot and then remove this cover.
6
Allied Data Technologies