Allied Data Technologies Tornado PCI V.90 Kurulum Kılavuzu - Sayfa 6

Ağ Kartı Allied Data Technologies Tornado PCI V.90 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Allied Data Technologies Tornado PCI V.90 12 sayfaları. Fax/modem

Sayfayı Yazdır
Tornado PCI V.90
1. First of all you have to check what kind of modem you have. This could be a modem type
"controllerless" or "softmodem" . On the backside of the modem should be a white label.
This label contains the product code.
If the modem has got a
product code with a C
it is a controllerless type.
You will find the drivers
in the VFM56.0-PRC map
at the CD or on our
Website.
If the modem has got a
product code with a S
it is a softmodem type.
You will find the drivers
in the VFM56.0-PRS map
at the CD or on our
Website.
2. Turn off your computer and disconnect the power from the electricity network.
The power may not be on while you are installing the internal fax/modem, as you might
damage your computer.
3. Loosen the necessary screws to remove the cover of the system casing.
Place the screws in a safe place and remove the cover.
4. Select one of the available PCI slots into which you would like to insert your internal
fax/modem.
5. Loosen the cover on top of the slot and then remove this cover.
6
Allied Data Technologies