CP Electronics MWS3A-DD 제품 설명서 - 페이지 11

{카테고리_이름} CP Electronics MWS3A-DD에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CP Electronics MWS3A-DD 12 페이지. Direct dim microwave presence/absence detector
CP Electronics MWS3A-DD에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지)

페이지 인쇄
CP Electronics MWS3A-DD 제품 설명서
Ideal for large office or classroom
Ideal for corridor or aisle applications
Ideal for open plan areas and offices
LOAD DOES NOT COME ON
Check to see if the live supply to the circuit is
good. Strap across the L and LIVE OUT terminal
to turn the load on.
If the supply and wiring are good, check the LUX
level setting. Increase the LUX level setting to
allow the controller to turn on at higher ambient
natural light level.
11. Detection Patterns
LIGHTS DO NOT GO OFF
Ensure that the area is left unoccupied for a
greater time period than the time out period set
using the switch.
Make sure that the sensor is not adjacent to
vibrating surfaces or objects (e.g. ventilation
equipment).
The unit may pick up movement through thin
partitions or walls. Reduce the sensitivity by
turning the adjuster anticlockwise.

12. Fault Finding

page 11