CP Electronics MWS3A-DD 제품 설명서 - 페이지 10

{카테고리_이름} CP Electronics MWS3A-DD에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CP Electronics MWS3A-DD 12 페이지. Direct dim microwave presence/absence detector
CP Electronics MWS3A-DD에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지)

페이지 인쇄

10.3 Two channel, common switch (continued)

PLEASE NOTE THAT THE

DIMMING SIGNAL IS USED TO

SWITCH THE DIMMING

LUMINAIRE ON/OFF AND

THEREFORE THE 240V FEED

TO THE LUMINAIRE FITTING

MUST COME FROM THE

PERMANENT LIVE SUPPLY

NEUTRAL

LIVE

CIRCUIT PROTECTION

(IF REQUIRED)

10.4 Single channel switching

Functions: Switches channel 1 only with occupancy, optional override switch. No dimming output.

Configured to presence detection: Turns on automatically with occupancy. Press and release down

switch to turn off. Press and release up switch to turn back on. Turns off after occupancy.

Configured to absence detection: Press and release up switch to turn on. Press and release down

switch to turn off. Turns off after occupancy.

Channel mode: Set to ―Switch only‖

Switch mode: Set to ―2 position switch together‖. Note: a single position switch can be used instead to

toggle the output, set to ―1 position switch separate‖.

NEUTRAL

LIVE

CIRCUIT PROTECTION

(IF REQUIRED)

page 10

DIM-

L/OUT

DIM+

SW1/UP

SW2

DOWN

EBDSPIR-DD SENSOR

MWS3A-DD SENSOR

PLEASE NOTE THAT THE CENTRE BIASED RETRACTIVE

SWITCH WILL PROVIDE CONTROL FOR THE DIMMING

LUMAIRE(S) ONLY. THE NON-DIMMING LUMINAIRE(S) WILL

BE CONTROLLED ONLY BY THE SENSOR

DIM-

L/OUT

DIM+

SW1/UP

SW2

DOWN

EBDSPIR-DD SENSOR

MWS3A-DD SENSOR

DIMMING

BALLAST

LUMINAIRE

DIMMING LUMINAIRE

(NON-DIMMING)

CENTRE BIASED

RETRACTIVE SWITCH

(240V SWITCHING)

Optional for presence,

mandatory for absence detection