Billi Eco Sparkling Tap option XL 사용자 설명서 - 페이지 10

{카테고리_이름} Billi Eco Sparkling Tap option XL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Billi Eco Sparkling Tap option XL 12 페이지.

User guide

Billi Eco Sparkling – XL.

Installing the CO

1 . Ensure all connections between the

regulator and unit are secure .

Position the regulator on top of the CO

cylinder .

2 . Tighten the bottle by rotating anti-clockwise .

– CO

will escape while you are turning the

bottle . Continue to turn the bottle to

form a seal with the regulator .

Refer diagram A.

3 . Open the pressure regulator by turning the

black knob clockwise .

Refer diagram B.

– Set the initial pressure to around 4 Bar .

Refer diagram C.

– Turn on the unit power and wait for the

unit to come back to temperature.

4 . Check bottle and connections for leaks using

soapy water to test for bubbles .

NOTE: the ¼" tube and pushfit fittings may

settle when the pressure is turned on .

5 . Increase the pressure to set your level of

carbonation .

Initial set point may vary once the unit is

running, you may need to reset the pressure

once the system has stabilised .

WARNING: Do not set the pressure above 5 bar .

cylinder