Billi Eco Sparkling Tap option XL Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Produto de canalização Billi Eco Sparkling Tap option XL. Billi Eco Sparkling Tap option XL 12 páginas.

Imprimir página
User guide
Billi Eco Sparkling – XL.
Installing the CO
2
1 . Ensure all connections between the
regulator and unit are secure .
Position the regulator on top of the CO
cylinder .
2 . Tighten the bottle by rotating anti-clockwise .
– CO
will escape while you are turning the
2
bottle . Continue to turn the bottle to
form a seal with the regulator .
Refer diagram A.
3 . Open the pressure regulator by turning the
black knob clockwise .
Refer diagram B.
– Set the initial pressure to around 4 Bar .
Refer diagram C.
– Turn on the unit power and wait for the
unit to come back to temperature.
4 . Check bottle and connections for leaks using
soapy water to test for bubbles .
NOTE: the ¼" tube and pushfit fittings may
settle when the pressure is turned on .
5 . Increase the pressure to set your level of
carbonation .
Initial set point may vary once the unit is
running, you may need to reset the pressure
once the system has stabilised .
WARNING: Do not set the pressure above 5 bar .
10
cylinder
2